TM 9--2350--292--20--1
0036 00--7
BRAKES DO NOT STOP EFFECTIVELY -- CONTINUED
0036 00
no
yes
Is 24 V dc present?
1. Disconnect harness 4W155 lead 48 from circuit
breaker at brake relay.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead on lead 48 and black
lead to ground check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
P
Repair (WP 0290 00) or replace
(WP 0320 00) harness 4W110.
Verify fault is corrected.
no
yes
Replace brake relay
(WP 0263 00). Verify
fault is corrected.
Is 24 V dc present?
1. Reconnect harness 4W110 and harness 4W155
lead 48 to brake relay.
2. Disconnect harness 4W155 lead 48 from brake
relay side of 80--amp circuit breaker.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead on circuit breaker
terminal and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Q
CONTINUED FROM STEP L
no
yes
Repair (WP 0290 00) or replace
(WP 0328 00) harness 4W155.
Verify fault is corrected.
CONTINUED ON NEXT PAGE
