BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1

BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1_204

BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1_206

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
161

TM 9--2350--292--20--1 0036 00--6 BRAKES DO NOT STOP EFFECTIVELY -- CONTINUED 0036 00 CONTINUED ON NEXT PAGE Is air valve linkage adjusted properly? Check brake actuating linkage adjustment (WP 0384 00). no yes L Does vehicle stop effectively? 1. Return vehicle to operating condition (TM 9--2350--292--10). 2. Operate vehicle at slow speed and apply brake (TM 9--2350--292--10). M Adjust linkage (WP 0384 00) and readjust brake linkage (WP 0356 00 or WP 0357 00). Verify fault is corrected. no yes CONTINUED FROM STEP H Fault corrected. Replace output reduction drive units (WP 0354 00). Verify fault is corrected. Is continuity present? 1. Remove cover from brake relay (WP 0263 00). 2. Place one multimeter lead on harness 4W155 lead 578 ground connector and other lead on harness 4W155 lead 578 brake relay connector. Check for continuity. no yes Repair (WP 0290 00) or replace (WP 0328 00) harness 4W155 lead 578. Verify fault is corrected. N CONTINUED FROM STEP A Is 24 V dc present? 1. Disconnect harness 4W155 and 4W110 from brake relay. 2. Turn MASTER switch ON (TM 9--2350--292--10). 3. Place multimeter red lead on relay terminal 88 and black lead to ground. Press brake pedal and check for voltage. 4. Turn MASTER switch OFF (TM 9--2350--292--10). O

Privacy Statement
Press Release
Contact