TM 9--2350--292--20--10036 00--4BRAKES DO NOT STOP EFFECTIVELY -- CONTINUED0036 00CONTINUED FROM STEP EIs disk resting against face of brake cylinder assembly?With brakes released, check that disk is restingagainst face of brake cylinder assembly.HnoyesGo to Step K.(Old Configuration) Go to step I.(New Configuration with brakemodulation) go to step J.Does disk return to rest against face of brake cylinderassembly?1. Inspect two spacers on modulating valve for dirt,rust or pitting.2. Clean and lubricate both spacers.3. Operate brake pedal through its entire rangeseveral times while observing disk and brakecylinder assembly.noyesAdjust brakes (WP 0355 00,WP 0356 00 or WP 0357 00).Verify fault is corrected.IDoes disk return to rest against the face of brakecylinder assembly?1. Inspect disk for build up of dirt and rust.2. Clean disk of all foreign material.3. Press and release brake pedal several timeswhile observing disk and brake cylinderassembly.noyesAdjust brake rod assembly(WP 0357 00). Verify fault iscorrected.JGo to Step K.CONTINUED FROM STEP HCONTINUED FROM STEP HCONTINUED ON NEXT PAGEFORWARD
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
