TM 9--2350--292--20--1
ENGINE DOES NOT RESPOND PROPERLY TO THROTTLE CONTROLS
0038 00
THIS WORK PACKAGE COVERS:
Engine Does Not Respond properly To Throttle Controls
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Equipment Conditions
Forward air intake grille door removed (WP 0415 00)
Personnel Required
Two
Can free pin fit be made?
1. Disconnect one end of throttle rod.
2. Depress accelerator linkage to maximum and
check for free pin fit when reconnecting
linkage.
no
yes
Are idle and solenoid speed adjustments proper?
1. Start main engine (TM 9--2350--292--10).
2. Check idle speed and solenoid speed
adjustment.
Adjust linkage (WP 0227 00).
Verify fault is corrected.
no
yes
Notify Direct Support
Maintenance.
Does engine respond properly?
Operate throttle controls (TM 9--2350--292--10).
no
yes
Fault corrected.
A
B
C
Notify Direct Support
Maintenance.
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
END OF TASK
0038 00--1/2 blank