TM 9--2350--292--20--1
0041 00--7
ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED --
CONTINUED
0041 00
f. ENGINE -- CONTINUED
(1)
ENGINE FAILS TO CRANK WHEN STARTER
SWITCH IS PRESSED -- CONTINUED
CONTINUED FROM STEP O
Is 24 V dc present?
1. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
2. Disconnect harness 3W132 P1 from bulkhead
disconnect.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead on pin A of
bulkhead disconnect receptacle and black
lead to ground. Check for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
P
no
yes
CONTINUED ON NEXT PAGE
Go to step W.
