TM 9--2350--292--20--1
0041 00--10
ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED --
CONTINUED
0041 00
Is continuity present?
no
yes
U
Is continuity present?
1. Reconnect lead 14 to CB1.
2. Hold START switch ON and place one
multimeter lead on each connector pin of
switch S4. Check for continuity.
V
no
yes
CONTINUED FROM STEP T
Replace START switch
(WP 0242 00). Verify
fault is corrected.
Place one multimeter lead in lead 14 switch S4 con-
nector socket to harness 4W109 J3 and other lead
in harness 4W151 J4 pin A. Check for continuity.
CONTINUED ON NEXT PAGE
Repair (WP 0290 00) or
replace (WP 0242 00)
lead 14. Verify fault is
corrected.