ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED (cont)

ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED (cont) - TM-9-2350-292-20-1_231

ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED cont)

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
188

TM 9--2350--292--20--1 0041 00--14 ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED -- CONTINUED 0041 00 Is 24 V dc present? no yes AD Is voltage less than 18 V dc? 1. Disconnect connector from low voltage starter protection module. 2. Place multimeter red lead on connector socket B and black lead to ground. Check for voltage. AE no yes Is continuity present? 1. Disconnect lead 14D from solenoid. 2. Place one multimeter lead on lead 14D terminal end and other lead on connector socket D. Check for continuity. CONTINUED FROM STEP AC Repair (WP 0290 00) or replace (WP 0300 00) harness 3W202. Verify fault is corrected. Place multimeter red lead on connector socket C. Check for voltage. Repair (WP 0290 00) or replace (WP 0300 00) harness 3W202. Verify fault is corrected. no yes Repair (WP 0290 00) or re- place (WP 0300 00) lead 26 of harness 3W202. Verify fault is corrected. CONTINUED ON NEXT PAGE AF

Privacy Statement
Press Release
Contact