ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED (cont)

ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED (cont) - TM-9-2350-292-20-1_230

ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED (cont) - TM-9-2350-292-20-1_232

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
187

TM 9--2350--292--20--1 0041 00--13 ENGINE FAILS TO CRANK WHEN STARTER SWTICH IS PRESSED -- CONTINUED 0041 00 CONTINUED FROM STEP Z Is 24 V dc present? 1. Reconnect harness 3W207 P1 at engine disconnect. 2. Place multimeter red lead on lead 82 terminal on starter solenoid and black lead to ground. Check for voltage. Replace harness 3W200 (WP 0298 00). Verify fault is corrected. no yes AA Is continuity present? AB no yes Is continuity present? 1. Reconnect ground lead to starter. 2. Place one multimeter lead on starter negative terminal and other lead on solenoid negative terminal. Check for continuity. AC 1. Reconnect harness 3W206 P1. 2. Disconnect ground lead from starter. 3. Place one multimeter lead on ground lead connector and other lead to chassis ground. Check for continuity. Replace starter (WP 0240 00). Verify fault is corrected. no yes CONTINUED ON NEXT PAGE Replace ground lead (WP 0342 00). Verify fault is corrected. FORWARD

Privacy Statement
Press Release
Contact