TM 9--2350--292--20--1
0043 00--4
ENGINE CRANKS BUT WILL NOT START IN COLD WEATHER
0043 00
CONTINUED FROM STEP I
CONTINUED ON NEXT PAGE
Is 24 V dc present?
J
no
yes
Go to Step S.
1. Turn MASTER switch, ENG FUEL SHUTOFF
switch, and ENGINE PREHEAT switch ON
(TM 9--2350--292--10).
2. Place multimeter red lead in harness 3W143 P1
socket G and black lead to ground. Check for
voltage.
3. Turn MASTER switch, ENG FUEL SHUTOFF
switch, and ENGINE PREHEAT switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
no
yes
K
1. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
2. Disconnect harness 3W143 P2 at bulkhead
disconnect.
3. Turn MASTER switch ON and hold ENGINE
PREHEAT switch ON (TM 9--2350--292--10).
4. Place multimeter red lead in 3W143 P2 socket
G and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0295 00)
harness 3W143. Verify
fault is corrected.
Repair (WP 0290 00) or
replace (WP 0316 00)
harness 4W103. Verify
fault is corrected.