TM 9--2350--292--20--1
0042 00--7
ENGINE CRANKS AT NORMAL SPEED BUT WILL NOT START -- CONTINUED
0042 00
CONTINUED FROM STEP K
CONTINUED ON NEXT PAGE
Does indicator remain lit?
1. Reconnect harness 4W101 P1 to switch
panel.
2. Disconnect harness 3W202 lead 54
connector from fuel shutoff solenoid.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
Replace fuel shutoff
solenoid (WP 0219 00).
Verify fault is corrected.
no
yes
L
Is 24 V dc present?
no
yes
M 1. Remove gauge panel from bracket (WP 0243 00).
2. Disconnect lead 4W152 CKT 54 from indicator
L3 in gauge panel.
3. Turn MASTER switch and ENG FUEL
SHUTOFF switch ON (TM 9--2350--292--10).
4. Place multimeter red lead on pin of lead 4W152
CKT 54 connector and black lead to ground.
Check for voltage.
5. Turn MASTER switch and ENG FUEL
SHUTOFF switch OFF (TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0243 00)
lead 54. Verify fault is
corrected.