TM 9--2350--292--20--1
0044 00--2
ENGINE CRANKS SLOWLY BUT WILL NOT START -- CONTINUED
0044 00
Is VTM reading at least 18 V dc?
no
yes
CONTINUED ON NEXT PAGE
Perform STE--ICE--R test 69
(TM 9--4910--571--12&P) and record results.
no
yes
Is VTM reading higher than 1.8 V dc?
CONTINUED FROM STEP B
Perform STE--ICE--R test 73
(TM 9--4910--571--12&P) and record results.
no
yes
Is VTM reading less than 8.33 milliohms?
C
D
E
Perform STE--ICE--R test 68
(TM 9--4910--571--12&P) and record results.
Check battery terminals
and connections for corrosion,
check electrolyte level,
recharge batteries
(TM 9--2350--292--10/
WP 0187 00) and run test
again. If test fails, run test 89
(TM 9--4910--571--12&P).
Perform test 67 with control
function 02
(TM 9--4910--571--12&P).
If test passes, repair (WP
0290 00) or replace (WP
0333 00) harness 4W800.
Verify fault is corrected.
Perform test 91
(TM 9--4910--571--12&P) on
harness 4W800. If harness is
faulty, repair (WP 0290 00) or
replace (WP 0333 00) as
necessary and verify fault is
corrected.