TM 9--2350--292--20--1
0068 00--1
ALL SIGNALS AT CABLE ASSEMBLY 4W504 CONNECTOR J1 ARE BELOW
VALID RANGE OR OPEN
0068 00
THIS WORK PACKAGE COVERS:
All Signals At Cable Assembly 4W504 Connector J1 Are Below Valid Range Or Open
INITIAL SETUP:
Tools and Special Tools
SPORT with Enhanced Diagnostics System software
loaded (item 133, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
SPORT connected to Enhanced Diagnostics System
remote terminal (WP 0086 00)
Enhanced Diagnostics System POWER switch OFF
Subfloor plates #10 and #15 removed (WP 0454 00)
Is wiring harness 4W504 properly connected?
no
yes
A
Properly connect wiring harness
4W504 connector J1 to wiring
harness 2W505 connector P1
(WP 0680 00). Verify fault is
corrected.
Ensure that wiring harness 4W504 connector J1 is
connected to wiring harness 2W505 connector P1.
CONTINUED ON NEXT PAGE
FORWARD
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.