ALL SIGNALS AT CABLE ASSEMBLY 4W504 CONNECTOR J1 ARE BELOW VALID RANGE OR OPEN (cont)

ALL SIGNALS AT CABLE ASSEMBLY 4W504 CONNECTOR J1 ARE BELOW VALID RANGE OR OPEN

ALL SIGNALS AT CABLE ASSEMBLY 4W504 CONNECTOR J1 ARE BELOW VALID RANGE OR OPEN (cont) - TM-9-2350-292-20-1_324

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
279

TM 9--2350--292--20--1 0068 00--2 ALL SIGNALS AT CABLE ASSEMBLY 4W504 CONNECTOR J1 ARE BELOW VALID RANGE OR OPEN -- CONTINUED 0068 00 CONTINUED FROM STEP A 1. Remove main winch and spade assembly (WP 0497 00). 2. Ensure that wiring harness 2W505 is properly connected to all sensors in the main winch and spade assembly (WP 0676 00). B CONTINUED ON NEXT PAGE Are sensors connected to wiring harness 2W505? yes no Properly connect wiring harness 2W505 to sensors (WP 0676 00). Verify fault is corrected.

Privacy Statement
Press Release
Contact