TM 9--2350--292--20--1
0069 00--2
ALL SIGNALS AT REMOTE TERMINAL UNIT CONNECTOR J3 ARE BELOW
VALID RANGE OR OPEN -- CONTINUED
0069 00
1. Remove subfloor plates #15, #18, #20, #22
and #29 (WP 0454 00).
2. Ensure that wiring harness 4W503 is properly
connected to all sensors (WP 0679 00).
B
CONTINUED ON NEXT PAGE
Are sensors connected to wiring harness 4W503?
yes
no
Properly connect wiring
harness 4W503 to all
sensors (WP 0679 00).
Verify fault is corrected.
FORWARD
