TM 9--2350--292--20--1
0089 00--5
SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC
SELECTOR SET IN MAIN POSITION -- CONTINUED
0089 00
I
Are all hoses free of leaks, restrictions, and damage?
CONTINUED FROM STEP H
no
yes
CONTINUED ON NEXT PAGE
Inspect the following hoses for leaks, restrictions,
and damage: hose from boom directional control
valve to boom shutoff valve port A; hose from boom
directional control valve to center pump port X3;
hose from boom shutoff valve to both check valves,
and hose from check valve to center pump port B3.
Tighten leaking connec-
tions and remove re-
strictions. If restrictions
cannot be removed, or if
hoses are damaged, re-
place (WP 0565 00 and
WP 0576 00). Verify
fault is corrected.
no
yes
Fault corrected.
J
Does hoist and main winch operate?
no
yes
Perform Step F attempting to operate hoist and
main winch.
Fault corrected.
CONTINUED FROM STEP F
Notify Direct Support
Maintenance.
FORWARD
