TM 9--2350--292--20--1
0089 00--7
SLOW OR NO HYDRAULIC COMPONENT OPERATION WITH HYDRAULIC
SELECTOR SET IN MAIN POSITION -- CONTINUED
0089 00
M
Are plugs, ports, and hoses free of leaks, restrictions,
and damage?
CONTINUED FROM STEP L
no
yes
1. Remove hoist and main winch directional
control valve assembly (WP 0556 00).
2. Inspect load sense shuttle plugs in hoist and
main winch directional control valve assembly,
ports LS, LS1, LS2, and all attaching hoses for
leaks, restrictions, and damage.
Tighten leaking connec-
tions and remove re-
strictions. If restrictions
cannot be removed, or if
parts are damaged, re-
place (WP 0573 00).
Verify fault is corrected.
Notify Direct Support
Maintenance.
CONTINUED ON NEXT PAGE
