TM 9--2350--292--20--1
0133 00--1
TRANSMISSION OIL TEMPERATURE GAUGE FAILS TO OPERATE.
0133 00
THIS WORK PACKAGE COVERS:
Transmission Oil Temperature Gauge Fails To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Engine deck removed (WP 0417 00)
Gauge panel removed (WP 0243 00)
Personnel Required
Two
Is 24 V dc present?
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
1. Disconnect lead 27 from temperature gauge.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead in lead 27 gauge
connector socket and black lead to ground.
Check for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is continuity present?
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Go to Step C.
Remove temperature gauge,
clean gauge mounting surface,
reinstall gauge (WP 0243 00).
Verify fault is corrected. If fault
still exists, replace temperature
gauge (WP 0243 00). Verify
fault is corrected.
Place one multimeter lead on temperature gauge
and the other to ground. Check for continuity.
Go to Step D.
