TM 9--2350--292--20--10134 00--1TRANSMISSION OIL PRESSURE GAUGE FAILS TO OPERATE.0134 00THIS WORK PACKAGE COVERS:Transmission Oil Pressure Gauge Fails To OperateINITIAL SETUP:Tools and Special ToolsGeneral mechanic’s tool kit (item 1, WP 0717 00)Multimeter (item 84, WP 0717 00)Equipment ConditionsVehicle MASTER switch OFF (TM 9--2350--292--10)Engine deck removed (WP 0417 00)Gauge panel removed from bracket (WP 0243 00)Personnel RequiredTwoWARNINGRemove rings, bracelets, wristwatches,and neck chains before working on anyvehicle. Jewelry can catch on equip-ment and cause injury, or may shortacross an electrical circuit and causesevere burns or electrical shock.AIs 24 V dc present?noyes1. Disconnect lead 27 from transmission pressuregauge.2. Turn MASTER switch ON(TM 9--2350--292--10).3. Place multimeter red lead in lead 27 gaugeconnector socket and black lead to ground.Check for voltage.4. Turn MASTER switch OFF(TM 9--2350--292--10).5. Reconnect lead 27 to pressure gauge.Go to Step C.noyesBCONTINUED ON NEXT PAGEIs continuity present?Remove pressure gauge andclean gauge mounting surface,reinstall gauge (WP 0243 00).Verify fault is corrected. If faultstill exists, replace pressuregauge (WP 0243 00). Verifyfault is corrected.Place one multimeter lead on transmission oilpressure gauge and one multimeter lead toground. Check for continuity.Go to Step D.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business