TM 9--2350--292--20--1
0133 00--3
TRANSMISSION OIL TEMPERATURE GAUGE FAILS TO OPERATE --
CONTINUED
0133 00
Is 24 V dc present?
1. Disconnect harness 4W103 P1 from gauge
panel.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead in harness 4W103
P1 socket K and black lead to ground. Check
for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
no
yes
F
G
CONTINUED ON NEXT PAGE
1. Disconnect lead 27 from temperature gauge.
2. Place one multimeter lead in lead 27 connector
socket and one multimeter lead in harness
4W152 J1 socket K and check for continuity.
3. Reconnect lead 27 to temperature gauge.
Is continuity present?
Repair (WP 0290 00) or replace
(WP 0316 00) harness 4W103.
Verify fault is corrected.
Repair (WP 0290 00) or
replace (WP 0243 00)
lead 27. Verify fault is
corrected.
CONTINUED FROM STEP E
