TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_911

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_913

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
867

TM 9--2350--292--20--1 0187 00--86 0187 00 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED ITEM NO. NOT FULLY MISSION CAPABLE IF: PROCEDURE LOCATION ITEM TO CHECK/ SERVICE INTERVAL SEMIANNUALLY INTERIOR 8 Stall Test CAUTION Do not stall test engine for more than 30 seconds. Vehicle brake will release when transmission shift control lever is moved from PARK position. Vehicle may move even with brakes in the locked position. Perform stall test: a. Depress brake (1) and hold in applied position, place transmission (2) in high range and run engine at full throttle for a maximum of 30 seconds. b. If engine speed is below 1800 rpm, it indicates that engine is not operating properly. Notify support maintenance activity that a check of engine performance is required. c. If the engine speed exceeds 1950 rpm, there is a clutch slippage in transmission. Notify support maintenance. If engine rpm is below 1800 or above 1950. 2 1

Privacy Statement
Press Release
Contact