TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_910

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_912

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
866

TM 9--2350--292--20--1 0187 00--85 0187 00 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED ITEM NO. NOT FULLY MISSION CAPABLE IF: PROCEDURE LOCATION ITEM TO CHECK/ SERVICE INTERVAL SEMIANNUALLY INTERIOR 7 Governor No Load Test CAUTION Engine speed must not exceed 2660 rpm for more than 2 or 3 seconds if governor malfunctions. With transmission lever (1) in neutral, gradually open the throttle until accelerator pedal (2) is fully depressed. Engine speed will generally exceed 2640 rpm momentarily. Then speed will stabilize between 2400 and 2660 rpm. If governor repeatedly cuts in and out or surges, notify support maintenance. If engine exceeds 2660 rpm for more than 3 seconds. 1 2

Privacy Statement
Press Release
Contact