TM 9--2350--292--20--1
0187 00--93
0187 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED
ITEM
NO.
NOT FULLY
MISSION
CAPABLE
IF:
PROCEDURE
LOCATION
ITEM TO
CHECK/
SERVICE
INTERVAL
SEMIANNUALLY
INTERIOR
14
Main Winch --
Continued
p. Clean the main winch fill/drain plug
(12) with clean rag (item 7,
WP 0716 00).
q. Install bayonet gauge (13).
LUBRICANTS/
COMPONENTS
REFILL
CAPACITY
EXPECTED TEMPERATURE*
+95°F to --10°F
(+35°C to --23°C)
Above +80°F
(Above +27°C)
Below -- 10°F
(Below -- 23°C)
OIL:
Lubricating Oil,
GO MIL--L--2105
9.5 gals
(36.0 L)
GO--75 or GO--80
(0--186)
*For Arctic Operation, refer to FM 9--207
GO--80/90
(0--226)
GO--85/140
(0--228)
r. Fill main winch drum (2) with
approximately 9.5 gallons proper grade oil
through main winch fill/drain plug (12) hole
while checking bayonet gauge (13). Do
not overfill.
12
2
13
