TM 9--2350--292--20--1 0187 00--98 0187 00 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED ITEM NO. NOT FULLY MISSION CAPABLE IF: PROCEDURE LOCATION ITEM TO CHECK/ SERVICE INTERVAL SEMIANNUALLY INTERIOR 15 Hoist Winch -- Continued WARNING Wire ropes can become frayed or contain broken wires. Wear heavy leather--palmed gloves when han- dling wire rope.  Frayed or broken wires can injure personnel. Never let moving wire rope slide through hands, even when wearing gloves. A broken wire could cut through glove and cut hands. f.  Payout and inspect wire rope (7) for frayed or broken ends (TM 9--2350--292--10). g. Check to ensure that wire rope wedge (8) is properly installed in winch drum (2). Damaged wire rope. Loose wedge. WARNING h. Clean wire rope (7) with dry--cleaning solvent (item 1, WP 0716 00). LUBRICANTS/ COMPONENTS REFILL CAPACITY EXPECTED TEMPERATURE* +40°F to --10°F (+4°C to --23°C) Above +32°F (Above 0°C) 0°F to --65°F (--17°C to --54°C) OIL: OE/HDO MIL--L--2104 As Required *For Arctic Operation, refer to FM 9--207 ALL TEMPERATURES 2 7 8 7 i.   Lubricate wire rope (7) with OE/HDO and allow to drain. j.   Tighten loose mounting screws and hydraulic lines.