TM 9--2350--292--20--1
0187 00--109
0187 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED
ITEM
NO.
NOT FULLY
MISSION
CAPABLE
IF:
PROCEDURE
LOCATION
ITEM TO
CHECK/
SERVICE
INTERVAL
SEMIANNUALLY
EXTERIOR
23
Tracks --
Continued
c. Check end connectors (1) using
end connector wear gauge (2)
(item 63, WP 0717 00).
(1) Place end connector wear gauge
(2) inside end of end connector (1).
(2) Depress gauge pin (3) of gauge
(2) and observe whether pin (3) touches
end connector (1).
(3) Rotate gauge (2) around end
surface of end connector (1) and
measure wear in various locations.
(4) If end of gauge pin (3) fails to
touch surface of end connector (1) at any
point when gauge pin (3) is fully
depressed, end connector (1) is
excessively worn and must be replaced
(WP 0398 00).
1
2
3
