Installation (cont) - TM-9-2350-292-20-2

Installation (cont) - TM-9-2350-292-20-2_1001

AUXILIARY POWER UNIT EXHAUST MANIFOLD REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
966

TM 9--2350--292--20--2 0618 00--8 AUXILIARY POWER UNIT MUFFLER AND EXHAUST SYSTEM REPLACEMENT -- CONTINUED 0618 00 Installation--Continued 12. Install muffler cover (11) with six screws (9) and six new lockwashers (10). 13. Install muffler heat shield (8) with four screws (6) and four new lockwashers (7). 14. Install exhaust tube assembly (2) on APU cover with three flat washers (5), three new lockwashers (4) and three screws (3). 15. Install valve assembly (1) over exhaust tube assembly (2) and tighten valve assembly (1) clamp. Figure 339 11 10 9 8 7 6 2 1 3 4 5 NOTE FOLLOW--ON MAINTENANCE: Lower boom (TM 9--2350--292--10) END OF TASK

Privacy Statement
Press Release
Contact