Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT DUCTING REPLACEMENT

Removal (cont) - TM-9-2350-292-20-2_1007

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
970

TM 9--2350--292--20--2 0620 00--2 AUXILIARY POWER UNIT DUCTING REPLACEMENT -- CONTINUED 0620 00 Removal--Continued NOTE The following steps are performed with the boom raised (TM 9--2350--292--10). 2. Remove three screws (4), three lockwashers (5) and cooling air shield (6) from APU cover (7). Discard lockwashers. 3. Remove four screws (8), four lockwashers (9), four flat washers (10) and screen (11) from cooling air shield (6). Discard lockwashers. 4. Remove two screws (12) and two lockwashers (13) securing auxiliary housing (14) to APU cover (7). Discard lockwashers. Figure 340 4 5 6 7 8 9 10 11 12 13 14

Privacy Statement
Press Release
Contact