Installation - TM-9-2350-292-20-2

AUXILIARY POWER UNIT OIL PRESSURE TRANSMITTER REPLACEMENT

AUXILIARY POWER UNIT OIL PRESSURE TRANSMITTER AND LOW OIL PRESSURE SWITCH REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1015

TM 9--2350--292--20--2 AUXILIARY POWER UNIT OIL PRESSURE TRANSMITTER REPLACEMENT -- CONTINUED 0631 00 Installation 1. Apply single layer of antiseizing tape to reducer (3) threads. 2. Install reducer (3) in adapter plug (4) on oil filter adapter assembly (5). 3. Tighten reducer (3) securely. 4. Apply single layer of antiseizing tape to oil pressure transmitter (2) threads. 5. Install transmitter (2) on reducer (3). 6. Tighten transmitter (2) securely. 7. Connect wiring harness 3W704 electrical lead 420 (1) to oil pressure transmitter (2). Figure 342 1 2 3 4 5 NOTE FOLLOW--ON MAINTENANCE: Install APU engine oil filter (WP 0596 00) Install APU cover (WP 0413 00) Connect battery power (WP 0256 00) END OF TASK 0631 00--2

Privacy Statement
Press Release
Contact