Installation - TM-9-2350-292-20-2

AUXILIARY POWER UNIT HOURMETER AND BRACKET REPLACEMENT (HATZ)

AUXILIARY POWER UNIT PREHEAT SOLENOID REPLACEMENT (HATZ)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1102

TM 9--2350--292--20--2 0663 00--2 AUXILIARY POWER UNIT HOURMETER AND BRACKET REPLACEMENT (HATZ) -- CONTINUED 0663 00 Installation 1. Install bracket (9) on APU with two screws (13), two new spring lockwashers (11), two flat washers (12) and two nuts (10). Torque screws 20--22 lb--ft (27--29.8 NSm). 2. Install hourmeter (5) on bracket (9) with three screws (7), three new lockwashers (8) and three nuts (6). 3. Install wiring harness 3W730 wire 658 and GND lead (3 and 4) on hourmeter (5) with two nuts (1) and two lock- washers (2). 4. Apply adhesive to exposed electric terminals on hourmeter. 1 2 3 4 1 2 5 6 7 8 9 10 11 12 13 NOTE FOLLOW--ON MAINTENANCE: Install APU cover (WP 0413 00) Connect battery power (WP 0256 00) END OF TASK

Privacy Statement
Press Release
Contact