TM 9--2350--292--20--2
0665 00--1
AUXILIARY POWER UNIT SHUT--DOWN SOLENOID, BRACKET AND FUEL
STOP ABSORBER REPLACEMENT (HATZ)
0665 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 9, WP 0718 00)
Lockwasher (item 466, WP 0718 00)
Electrical tiedown strap (item 472, WP 0718 00)
Circlips (2) (item 481, WP 0718 00)
Equipment Conditions
APU removed from vehicle (WP 0587 00)
Removal
1. Remove electrical tiedown strap (1) from shut--down solenoid (2).
2. Disconnect shut--down solenoid connector (3) from wiring harness 3W730 connector P2 (4).
3. Remove two circlips (5) and link pin (6) from governor lever (7), fuel stop absorber (8) and shut--down solenoid
(2). Discard circlips.
4. Remove two screws (9), two lockwashers (10), two flat washers (11) and shut--down solenoid (2) from APU. Dis-
card lockwashers.
5. Loosen screw (12) and remove screw (13), lockwasher (14), flat washer (15) and shut--down solenoid bracket
(16). Discard lockwasher.
1
2
3
4
5
6
7
8
5
13
14
15
12
16
9
10
11
