Removal - TM-9-2350-292-20-2

AUXILIARY POWER UNIT SHUT--DOWN SOLENOID, BRACKET AND FUEL STOP ABSORBER REPLACEMENT (HATZ)

Installation (cont) - TM-9-2350-292-20-2_1144

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1107

TM 9--2350--292--20--2 0665 00--2 AUXILIARY POWER UNIT SHUT--DOWN SOLENOID, BRACKET AND FUEL STOP ABSORBER REPLACEMENT (HATZ) -- CONTINUED 0665 00 Removal--Continued 6. Remove screw (17) and fuel stop absorber (8) from dampener bracket (18). 7. Remove nut (19), lockwasher (20) and dampener bracket (18). Discard lockwasher. NOTE Remove the attaching hardware in step 8 only if parts are damaged. 8. Remove two nuts (21), lockwasher (22), two flat washers (23) and screw (24) from APU. Discard lockwasher. 9. Inspect parts for damage and replace as required. Installation 1. Install screw (24), two flat washers (23), new lockwasher (22) and two nuts (21), if removed. 2. Install dampener bracket (18) with nut (19) and new lockwasher (20). 3. Install fuel stop absorber (8) with screw (17). 17 8 24 23 22 19 20 18 21

Privacy Statement
Press Release
Contact