TM 9--2350--292--20--2
0665 00--3
AUXILIARY POWER UNIT SHUT--DOWN SOLENOID, BRACKET AND FUEL
STOP ABSORBER REPLACEMENT (HATZ) -- CONTINUED
0665 00
Installation--Continued
4. Slide shut--down solenoid bracket (16) under screw (12), then install screw (13), flat washer (15) and new lock-
washer (14). Tighten screw (12).
5. Install shut--down solenoid (2) on shut--down solenoid bracket (16) with two flat washers (11), two new lockwash-
ers (10) and two screws (9).
6. Install link pin (6) to shut--down solenoid (2), fuel stop absorber (8) and governor lever (7) with two new circlips
(5).
7. Connect wiring harness 3W730 connector P2 (4) to shut--down solenoid connector (3).
8. Secure shut--down solenoid connector (3) to shut--down solenoid (2) with new electrical tiedown strap (1).
1
2
3
4
5
6
7
8
5
13
14
15
12
16
9
10
11
NOTE
FOLLOW--ON MAINTENANCE:
Install APU in vehicle (WP 0587 00)
END OF TASK
