TM 9--2350--292--20--2
0395 00--2
IDLER ARM ASSEMBLY REPAIR -- CONTINUED
0395 00
Disassembly
1. Remove preformed packing (4) from idler arm assembly (2). Discard preformed packing.
2. Straighten edges of key washer (5).
3. Remove bearing nut (6) and key washer (5) from idler arm assembly (2). Discard key washer.
4. Remove key washer (7), flat washer (8) and sleeve bearing (9) from idler arm assembly (2).
5. Remove spacer (10) and sleeve bearing (11) from idler arm assembly (2).
6. Remove retainer (12) with seal (13) as an assembly from idler arm assembly (2).
7. Remove seal (13) from retainer (12). Discard seal.
WARNING
8. Clean all components with dry--cleaning solvent.
9. Inspect all parts for wear and damage. Discard all worn or damaged components.
Figure 186
2
13
12
11
10
9
8
7
5
6
4
