TM 9--2350--292--20--2
0398 00--1
TRACK SHOE ASSEMBLY REPLACEMENT
0398 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Track connecting fixtures (2) (item 56, WP 0717 00)
Socket wrench adapter (item 55, WP 0717 00)
Track end connector puller and pump (item 57,
WP 0717 00)
Hand hammer (item 58, WP 0717 00)
Crowbar (item 52, WP 0717 00)
Torque wrench (item 9, WP 0717 00)
Socket wrench (item 129, WP 0717 00)
Materials/Parts
Parts kit, track (item 169, WP 0718 00)
Parts kit, track (item 170, WP 0718 00)
Externally released bolts (4) (item 171, WP 0718 00)
Metal wedges (4) (item 172, WP 0718 00)
Equipment Conditions
Left or right armor skirt panels #1, #3, #5 and #7
opened (TM 9--2350--292--10)
Personnel Required
Two
References
TM 9--2350--292--10
NOTE
This task applies to all track shoe assemblies, on left or
right track assemblies. Each track assembly consist of
84 track shoe assemblies. This task replaces only one
track shoe Assembly
Removal
1. Position vehicle so that track shoe assembly (1) to be replaced is between idler wheel (2) and front roadwheel (3)
(TM 9--2350--292--10).
2. Install track binder (TM 9--2350--292--10).
3. Release track tension (TM 9--2350--292--10).
Figure 188
1
3
2
ARMOR SKIRT REMOVED FOR CLARITY
