TM 9--2350--292--20--2
0398 00--3
TRACK SHOE ASSEMBLY REPLACEMENT -- CONTINUED
0398 00
Removal--Continued
11. Using ratchet (9), close track connecting fixtures (8) until jaws (10) are tight against track shoe assembly (1) pins.
12. Remove self--locking nut (12), screw (13), cap (14) and center guide (15) from track shoe assembly (1). Discard
self--locking nut.
13. Remove two end connectors (6) and track end puller and pump (7) from track shoe assembly (1).
14. Hold track assembly (11) up, remove two track connecting fixtures (8) and separate track assembly (11). Lower
track.
15. Remove two remaining end connectors (6) and track shoe assembly (1) from track assembly (11). Discard exter-
nally released bolts and metal wedges.
16. Remove remaining self--locking nut (12), screw (13), cap (14) and center guide (15) from track shoe assembly (1).
Discard self--locking nut.
17. Inspect end connectors (6), caps (14), center guides (15) and screws (13). Discard worn or damaged compo-
nents.
Figure 188
1
6
7
8
6
8
10
9
12
15
14
13
11
