TM 9--2350--292--20--2
0398 00--2
TRACK SHOE ASSEMBLY REPLACEMENT -- CONTINUED
0398 00
Removal--Continued
WARNING
Track must be blocked so that vehicle will not roll out of
control during track maintenance. Failure to securely
block vehicle tracks could result in severe injury to per-
sonnel and damage to equipment.
4. Loosen two externally released bolts (4) and two metal wedges (5) securing two end connectors (6) to track shoe
assembly (1) pins. Hit externally released bolts (4) to loosen metal wedges (5).
5. Remove two externally released bolts (4) and two metal wedges (5) from two end connectors (6). Discard exter-
nally released bolts and metal wedges.
6. Rap two end connectors (6) to loosen end connectors on track shoe assembly (1) pins.
7. Position hooks on track end connector puller and pump (7) behind end connector (6), align studs on track end
connector puller and pump (7) with pins on track shoe assembly (1).
8. Pump handle on track end connector puller and pump (7) until the space between end connector (6) and track
shoe assembly (1) is 1 in. (25.4 mm).
9. Install track connecting fixture (8) behind end connector (6) and hook on track shoe assembly (1) pins.
10. Repeat steps 6 through 8 to install second track connecting fixture (8) on opposite side of track shoe assembly (1)
pins.
Figure 188
4
1
6
5
7
8
4
5
6
8