TM 9--2350--292--20--20412 00--2SHOCK ABSORBER AND MOUNTING BRACKETS REPAIR -- CONTINUED0412 00Removal--Continued1. Remove cotter pin (1) and headed pin (2), separate bottom of shock absorber (3) from lower bracket (4). Discardcotter pin.2. Remove cotter pin (5), headed pin (6) and shock absorber (3) from upper bracket (7). Discard cotter pin.3. Remove four screws (8), four lockwashers (9) and lower bracket (4) from vehicle. Discard lockwashers.4. Remove four screws (10), four lockwashers (11) and upper bracket (7) from vehicle. Discard lockwashers.Disassembly1. Remove three staked positions on each side of shock absorber (3) that retains bearing (12).2. Remove bearing (12) from shock absorber (3).WARNING3. Clean all components and mating surfaces of upper bracket and vehicle hull and screws (10) with dry--cleaningsolvent.4. Check shock absorber (3), brackets (4 and 7) and bearing (12) for damage and wear. Discard any worn or dam-age components.Figure 197567111021489123ARMOR SKIRTS REMOVEDFOR CLARITY
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
