TM 9--2350--292--20--2
0410 00--4
TOWING PINTLE AND MOUNT ASSEMBLY REPAIR -- CONTINUED
0410 00
Installation
1. Install lubrication fitting (7) in mount (5).
WARNING
2. Clean mounting holes of vehicle hull and mount (5), and screws (8) with dry-cleaning solvent.
WARNING
3. Apply sealing compound to threads and under heads of six screws (8).
4. Install mount (5) on vehicle with six screws (8) and six new lockwashers (9).
5. Coat shaft of pintle hook (3) with lubricant.
6. Install flat washer (6) on pintle hook (3).
NOTE
Assembled towing pintle must turn freely in pintle mount.
7. Install pintle hook (3) in mount (5) with flat washer (4), nut (2) and new cotter pin (1).
8. Lubricate towing pintle (WP 0187 00).
Figure 195
1
3
5
6
2
4
9
8
7
NOTE
FOLLOW--ON MAINTENANCE:
Install rear tow bar (TM 9--2350--292--10)
END OF TASK