Disassembly - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
298

TM 9--2350--292--20--2 0410 00--2 TOWING PINTLE AND MOUNT ASSEMBLY REPAIR -- CONTINUED 0410 00 Removal--Continued 4. Remove lubrication fitting (7) from mount (5). 5. Remove six screws (8), six lockwashers (9) and mount (5) from vehicle. Discard lockwashers. Disassembly 1. Remove drive screw (10) and chain (11) from pintle hook (3). Discard screw. 2. Remove lubrication fitting (12) from straight pin (13). 3. Remove straight pin (13), cotter pin (14), latch (15) and helical spring (16) from pintle lock (17). Separate cotter pin (14) from chain (11). Discard straight pin and cotter pin. 4. Remove lubrication fitting (18) from bolt (19). 5. Remove cotter pin (20), nut (21), bolt (19) and pintle lock (17) from pintle hook (3). Discard cotter pin 6. Inspect parts for damage and replace as required. Figure 195 9 10 3 14 12 13 8 7 5 15 16 11 17 18 19 20 21

Privacy Statement
Press Release
Contact