TM 9--2350--292--20--2
0409 00--2
STEERING AND SHIFTING LINKAGE LUBRICATION ADAPTER FITTING,
HOSES AND HARDWARE REPLACEMENT -- CONTINUED
0409 00
Removal
1. Remove four lubrication fittings (1) from adapter fitting (2).
2. Disconnect four lubrication hoses (3) from four adapters (4).
3. Remove two screws (5), two lockwashers (6) and adapter fitting (2) with four adapters (4) from vehicle. Discard
lockwashers.
4. Remove four adapters (4) from adapter fitting (2).
5. Remove screw (7), lockwasher (8), flat washer (9) and clamp (10) securing lubrication hose (3). Discard lock-
washer.
6. Disconnect lubrication hose (3) from elbow (11) on bottom of bell crank (12), remove lubrication hose (3) from ve-
hicle.
7. Remove elbow (11) from bottom of bell crank (12).
8. Disconnect lubrication hose (3) from elbow (13) on top of bell crank (12), remove lubrication hose (3) from vehicle.
9. Remove elbow (13) from top of bell crank (12).
10. Inspect parts for damage and replace as required.
Figure 193
FORWARD
12
1
2
3
3
4
4
5
6
7
8
9
10
11
13