TM 9--2350--292--20--2STEERING AND SHIFTING LINKAGE LUBRICATION ADAPTER FITTING,HOSES AND HARDWARE REPLACEMENT -- CONTINUED0409 00Installation1. Install elbow (13) in top of bell crank (12).2. Connect lubrication hose (3) to elbow (13).3. Install elbow (11) in bottom of bell crank (12).4. Connect lubrication hose (3) to elbow (11).5. Secure lubrication hose (3) on vehicle hull with clamp (10), screw (7), new lockwasher (8) and flat washer (9).6. Install four adapters (4) in adapter fitting (2).7. Install adapter fitting (2) with four adapters (4) on vehicle with two screws (5) and two new lockwashers (6).8. Connect four lubrication hoses (3) to four adapters (4).9. Install four lubrication fittings (1) in adapter fitting (2).10. Lubricate steering and shifting linkage (WP 0187 00).Figure 1931212334456789101113NOTEFOLLOW--ON MAINTENANCE:Install engine deck grille, if removed(WP 0415 00)Install powerpack, if removed (WP 0188 00)END OF TASK0409 00--3/4 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business