TM 9--2350--292--20--2
0409 00--1
STEERING AND SHIFTING LINKAGE LUBRICATION ADAPTER FITTING,
HOSES AND HARDWARE REPLACEMENT
0409 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 10, WP 0718 00)
Lockwasher (item 356, WP 0718 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
For maintenance of lubrication hoses and
bell crank fittings
Engine deck grille removed (WP 0415 00)
For maintenance of adapter fitting
NOTE
The adapter fitting, lubrication fittings and four adapters
on adapter fitting may be replaced by opening the engine
grille next to battery box.
There are four lubrication hoses, two for the steering link-
age and two for the shifting linkage. All four lubrication
hoses and fittings are removed and installed in the same
manner. This task removes and installs only one set of
hoses.
Perform Removal steps 1 through 4 and 10 and Installa-
tion steps 6, 7, 8, 9 and 10 for maintenance of adapter
fitting.
Perform Removal steps 2 and 5 through 10 and Installa-
tion steps 1 through 5, 8 and 10 for maintenance of lu-
brication hoses and fittings.
