TM 9--2350--292--20--2
0410 00--1
TOWING PINTLE AND MOUNT ASSEMBLY REPAIR
0410 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Auto adjustable wrench (item 22, WP 0717 00)
Electric drill (item 11, WP 0717 00)
Twist drill set (item 12, WP 0717 00)
Crowbar (item 52, WP 0717 00)
Materials/Parts
Lubricant (item 3, WP 0716 00)
Cotter pin (item 29, WP 0718 00)
Cotter pin (item 30, WP 0718 00)
Cotter pin (item 31, WP 0718 00)
Lockwashers (6) (item 32, WP 0718 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Sealing compound (item 42, WP 0716 00)
Materials/Parts--Continued
Drive screw (item 33, WP 0718 00)
Straight pin (item 34, WP 0718 00)
Equipment Conditions
Rear tow bar removed (TM 9--2350--292--10)
Personnel Required
Two
References
TM 9--2350--292--10
NOTE
To perform maintenance of the towing pintle lock with
pintle hook attached to vehicle, perform Disassembly
steps 1 through 6 and Assembly steps 1 through 7.
Removal
1. Remove cotter pin (1). Hold nut (2) with adjustable wrench while turning the pintle hook (3). Remove nut (2) and
flat washer (4) from pintle hook (3). Discard cotter pin.
2. Remove pintle hook (3) from mount (5).
3. Remove flat washer (6) from pintle hook (3).
Figure 195
1
5
6
2
4
3
