TM 9--2350--292--20--2
0411 00--2
LOCKOUT BLOCK SPACERS AND BUMPER ASSEMBLIES REPLACEMENT
-- CONTINUED
0411 00
Installation
WARNING
1. Clean mating surfaces of bumper assembly (5) and vehicle hull and screws (6) with dry--cleaning solvent.
WARNING
2. Apply sealing compound on threads and under heads of 12 screws (6).
3. Install bumper assembly (5) on vehicle with 12 screws (6) and 12 new lockwashers (7). Torque 12 screws to
85--95 lb--ft (115--129 Nm).
4. Install three screws (1), two new lockwashers (2), two flat washers (3) and lockout block spacer (4) on bumper
assembly (5).
Figure 196
1
1
2
3
4
5
7
6
NOTE
FOLLOW--ON MAINTENANCE:
Close armor skirt panel #1 or #6
(TM 9--2350--292--10).
END OF TASK