TM 9--2350--292--20--2SHOCK ABSORBER AND MOUNTING BRACKETS REPAIR -- CONTINUED0412 00Assembly1. Lubricate all bearing surfaces before installation.2. Install bearing (12) in shock absorber (3).3. Stake bearing (12) in three equally spaced places on both sides of shock absorber (3).InstallationWARNING1. Apply sealing compound to threads and under heads of screws (10).2. Install upper bracket (7) on vehicle with four screws (10) and four new lockwashers (11). Torque screws to145--175 lb--ft (197--237 N•m).3. Install lower bracket (4) on vehicle hull with four screws (8) and four new lockwashers (9). Torque screws to300--340 lb--ft (407--461 N•m).NOTEShock absorber bracket pins are to be installed from theroad wheel side so that flats on head of bracket pins aresecured in slot on clevis.4. Install top of shock absorber (3) to upper bracket (7) with headed pin (6) and new cotter pin (5).5. Install bottom of shock absorber (3) to lower bracket (4) with headed pin (2) and new cotter pin (1).567111021489123Figure 197NOTEFOLLOW--ON MAINTENANCE:Close left or right armor skirt panel(TM 9--2350--292--10)END OF TASK0412 00--3/4 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business