TM 9--2350--292--20--2
PERSONNEL SEAT ASSEMBLY REPAIR
0460 00
THIS WORK PACKAGE COVERS:
Disassembly, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 199, WP 0718 00)
Equipment Conditions
Personnel seat removed (WP 0457 00)
NOTE
There are two personnel seats. The procedures are the
same for both seats.
Disassembly
1. Remove seat assembly (1) from pedestal (2).
2. Remove two screws (3), two lockwashers (4) and cushion (5) from body assembly (6). Discard lockwashers.
3. Inspect parts for damage and replace as required.
Assembly
1. Install cushion (5) on body assembly (6) with two screws (3) and two new lockwashers (4).
2. Install seat assembly (1) on pedestal (2).
Figure 235
5
1
6
4
3
2
NOTE
FOLLOW--ON MAINTENANCE:
Install personnel seat (WP 0457 00)
END OF TASK
0460 00--1/2 blank
