TM 9--2350--292--20--2
0461 00--1
DRIVER’S AND MECHANIC’S SEAT REPAIR
0461 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (9) (item 2, WP 0718 00)
Self--locking nut (item 175, WP 0718 00)
Lockwashers (2) (item 12, WP 0718 00)
Lockwashers (8) (item 9, WP 0718 00)
Lockwashers (11) (item 10, WP 0718 00)
Lockwasher (item 27, WP 0718 00)
Lockwashers (3) (item 37, WP 0718 00)
Split washers (2) (item 176, WP 0718 00)
Retaining rings (4) (item 179, WP 0718 00)
Permanent depression washers (4) (item 177,
WP 0718 00)
Headless grooved pin (item 182, WP 0718 00)
Lockwashers (4) (item 18, WP 0718 00)
Safety goggles (item 93, WP 0716 00)
Headless grooved pin (item 232, WP 0718 00)
Materials/Parts -- Continued
Plain encased seals (4) (item 181, WP 0718 00)
X--Washers (3) (item 178, WP 0718 00)
Headless grooved pins (3) (item 180, WP 0718 00)
Cotter pins (3) (item 15, WP 0718 00)
Equipment Conditions
Subfloor plate removed (WP 0454 00)
For mechanic’s seat lower support
Hull drain valve brackets removed (WP 0452 00)
For driver’s seat lower support
Seat in stowed position (TM 9--2350--292--10)
Personnel Required
Two
References
TM 9--2350--292--10
NOTE
The procedures for the driver’s and mechanic’s seat are
the same, except that only the driver’s seat has a stop
and self--locking nut.
Perform Removal steps 2 and 3 and Installation steps 1
and 2 if the lower seat support is being removed for main-
tenance.
