TM 9--2350--292--20--2
0510 00--5
SPADE ASSEMBLY LUBRICATION HOSES, TUBES, FITTINGS AND
ADAPTER BLOCK REPLACEMENT -- CONTINUED
0510 00
Installation--Continued
7. Install adapter block (3) on hull cover plate assembly (10) with two screws (14) and two new lockwashers (15).
8. Install two lubrication fittings (13) in adapter block (3).
9. Install four lubrication fittings (12) in adapter block (3).
10. Install four straight adapters (11) in adapter block (3).
11. Connect four tubes (8) to four straight adapters (11) on adapter block (3).
12. Install four straight adapters (9) on spade cylinder link pivot points (5) in hull cover plate assembly (10).
Figure 281
9
10
9
9
9
12
3
11
8
8
11
14
15
13
5
5
