TM 9--2350--292--20--2
0510 00--6
SPADE ASSEMBLY LUBRICATION HOSES, TUBES, FITTINGS AND
ADAPTER BLOCK REPLACEMENT -- CONTINUED
0510 00
Installation--Continued
13. Connect four tubes (8) to four straight adapters (9) at spade cylinder link pivot points (5) in hull cover plate assem-
bly (10).
14. Install two pipe couplings (2) in adapter block (3).
15. Install one hose (1) and six clamps (7) with two screws (6).
16. Connect two hoses (1) to two fitting assemblies (4) at spade cylinder link pivot points (5).
17. Connect two hoses (1) to pipe couplings (2) at adapter block (3).
18. Lubricate spade assembly in accordance with WP 0187 00.
Figure 280
1
1
3
2
1
2
4
5
8
9
9
8
10
6
6
1
7
7
ONE SCREW
AND TWO CLAMPS
OPPOSITE SIDE
(NOT SHOWN)
NOTE
FOLLOW--ON MAINTENANCE:
Install main winch and spade assembly (WP 0497 00)
END OF TASK
