TM 9--2350--292--20--2
0510 00--2
SPADE ASSEMBLY LUBRICATION HOSES, TUBES, FITTINGS AND
ADAPTER BLOCK REPLACEMENT -- CONTINUED
0510 00
Removal--Continued
6. Remove four straight adapters (9) from spade cylinder link pivot points (5) in hull cover plate assembly (10).
7. Disconnect four tubes (8) from four straight adapters (11) at adapter block (3).
8. Remove four straight adapters (11) from adapter block (3).
9. Remove four lubrication fittings (12) from adapter block (3).
10. Remove two lubrication fittings (13) from adapter block (3).
11. Remove two screws (14), two lockwashers (15) and adapter block (3) from hull cover plate assembly (10). Dis-
card lockwashers.
Figure 281
9
10
9
9
9
12
3
11
8
8
11
14
15
13
5
5
