TM 9--2350--292--20--2
0510 00--1
SPADE ASSEMBLY LUBRICATION HOSES, TUBES, FITTINGS AND
ADAPTER BLOCK REPLACEMENT
0510 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 9, WP 0718 00)
Equipment Conditions
Main winch and spade assembly removed
(WP 0497 00)
Removal
1. Disconnect two hoses (1) from pipe couplings (2) at adapter block (3).
2. Disconnect two hoses (1) from two fitting assemblies (4) at spade cylinder link pivot points (5).
3. Remove two screws (6), six clamps (7) and one hose (1).
4. Remove two pipe couplings (2) from adapter block (3).
5. Disconnect four tubes (8) from four straight adapters (9) at spade cylinder link pivot points (5) in hull cover plate
assembly (10).
Figure 280
1
1
3
2
1
2
4
5
8
9
9
8
10
6
6
1
7
7
ONE SCREW
AND TWO CLAMPS
OPPOSITE SIDE
(NOT SHOWN)
